Loading...

Windows 10 Anniversary Update Causing Random Display Problem

Windows RT

HP Envy 15 Laptop Model: 15z-j100 Laptop came OEM configured with Windows 8.1. The computer worked flawlessly as purchased. Upgraded to Windows 10 when it became available. Again, the laptop performed flawlessly - no issues. This summer (2016) the Windows 10 Anniversary update was pushed and since then I have had this problem. At random times, maybe once or twice every few hours of use, the display blanks for just a few seconds, 4 times. This is consistent. Also, each time the screen blanks off, when it comes back on, there is an accompanying Windows "notification" tone. The last time the screen blanks, it is for a few additional seconds and the accompanying notification tone is different than the other three times. It is not auto-booting, just momentarily blanking and then returning to the normal display. I can pick right up where I left off. The whole event takes less than a minute. This mode of malfunction is identical every time. I have not found any satisfactory solutions online, have inquired at HP (they don't want to help since it isn't the OEM installed OS), and have just dealt with it until now. Recently, it seems to be occurring more frequently and I am concerned since this is my primary computer for college. I believe there is an issue with the Anniversary update, but I hate to roll back to the original Windows 10 release and lose all of the security updates as well. Help?!

Answered
Other Windows apps 19/01/2017 0 Comments 2 views

Win10 Activation after hardware upgrade broken

Windows RT

I just upgraded my computer, motherboard, cpu, ram, that had previously used Win10 Pro free update from Win7 pro. I understand that major changes have been made, but even after attempting the troubleshoot activation option and selecting the new hardware option Windows fails to connect to the authentication server. Is there a way around this broken dialogue?

Answered
Other Windows apps 19/01/2017 0 Comments 2 views

Taskbar changed from virus

Windows RT

So I think a virus of some sort just installed itself (I'm doing an AVG scan currently) but I was randomly taken to a page a couple minutes ago with the address of (r8980.ru) and I had a bit of a fiasco trying to close out of it, as dialogue boxed kept coming up telling me to add the extension. When I finally got out, by taskbar-- formerly translucent with a good number of icons-- was now solid black with no icons past the default. I also cannot engage the taskview (where you see all open windows and desktops) and am not really sure where to locate this thing or how to revert back to normal. Any tips? Windows 10.

Answered
Update & recovery 19/01/2017 0 Comments 2 views

Gaming FPS drops dramatically after installing Visual Studio

Windows RT

The other day, I installed Visual Studio Community. After restarting, I went to play Battlefield 1. The framerate that I usually get is around 50+, but now it is about half, hovering in the 20's. I did some research and found that I am not the only person that has had this issue. There does seem to be some common themes. All the instances were on AMD processors (mostly Athlon/Phenom era) running Windows 8 or higher. This has been going on for a few years it seems, so I doubt that a fix is available. My crazy theory is that the older AMD processors lack one of the instruction sets (probably AVX) that Visual Studio uses to emulate Android/IOS devices. So, on older processors, the VS installer replaces some Windows system files to compensate and mimic the missing optimizations to work properly. The side-effect is that windows reports this instruction set as existing and games now think that the CPU optimization is available attempting to utilize it, but since it is software emulated, it makes the game run more inefficiently than before. My PC: AMD Phenom 1090T X6 R9 280X 8GB Ram Windows 10 Here are some links to people who have experience the same thing: A: https://linustechtips.com/main/topic/639918-windows-10-low-fps/?page=2 B: http://forum.worldoftanks.eu/index.php?/topic/554232-massive-fps-drops/ C: https://steamcommunity.com/app/730/discussions/0/496879865897785878/ D: https://www.reddit.com/r/ffxiv/comments/38voh0/suddenly_very_bad_fps/ E: https://connect.microsoft.com/VisualStudio/feedback/details/1100872/poor-performance-in-games-after-installing-visual-studio-community F: http://forums.steampowered.com/forums/showthread.php?t=3238108 G: https://forum-en.guildwars2.com/forum/support/support/Fps-drop-after-installing-visual-studio-2013 H: https://eu.battle.net/forums/en/wow/topic/17612991514 I: https://www.bleepingcomputer.com/forums/t/609180/why-are-these-games-lagging-on-my-build/ Thanks!

Answered
Other Windows apps 19/01/2017 0 Comments 2 views

No Sign-in window after waking up from Sleep Mode

Windows RT

I have been running Windows 10 for the last year, the PC goes into sleep mode after 20 minutes. I press the keyboard/click the mouse once to wake it up, and press the keyboard/click the mouse again for the sign-in window to appear. Since the Microsoft security update on 14th Jan the PC still wakes up fine, but after the second press/click the sign-in window no longer appears. Now I have to do a ctrl+alt+del each time before the sign-in window appears. I have checked all the options to ensure that "select ctrl+alt+del" is not set anywhere. How can I go back to the way it used to work before?

Answered
Security, privacy & accounts 19/01/2017 0 Comments 4 views

BSOD

Windows RT

I am facing BSOD regularly and its annoying and frustrating. I face this on a fresh windows install as well and once tried using UBUNTU but faced the same issue. I know it happens due to some dysfunctional hardware/software and I want to know about the one responsible for BSOD on my system. Now let me explain the scenario: For fresh install it happens when I start my system for the first time in the day or after some time interval say 1 hr. BSOD occurrence gradually increases with time and right now it has reached infinity :) Only hardware I have not replaced is Motherboard, daughter board & processor. By the way I am using: Dell Inspiron 5010 Windows 7 64bit - i3 M370 2.40GHz RAM 4GB ATI graphics 1gb Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 124 BCP1: 0000000000000000 BCP2: FFFFFA8004D1B028 BCP3: 00000000BE000000 BCP4: 0000000000800136 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:WindowsMinidump11917-18704-01.dmp C:UsersSonu LalitAppDataLocalTempWER-44475-0.sysdata.xml OneDrive Link for most recent dump files is given below: https://1drv.ms/f/s!ArYR3y7fLJ3na9MVF9pZMNVGx84 Can anyone help me with this? I'd like to know about exact hardware/driver causing this issue so that I can fix it. It doesn't happen in Safe Mode. Thanks in advance. Please Help.

Answered
Windows Store 19/01/2017 0 Comments 3 views

DPC watchdog violation BSOD and loop and 0101101 Keyboard Stuck Key

Windows RT

Hello, thanks for any help in advance. I started up my computer today and it got stuck in a restart loop going back to DPC Watchdog Violation BSOD. The machine (Lenovo Z570, originally running Win7, now on Windows 10 64 home), made several attempts to self fix the problem, rolling back to previous versions etc but got stuck in a loop, saying it was unable to diagnose the problem etc. I made a few attempts at doing a hard restart and managed to get into safe mode once, but it didn't help me with anything. When it first switches on I got a 0101101 Keyboard Stuck Key message also and bleep. Somehow after about 3 hours I managed to get the machine to boot into windows. No Idea how. Intermittently the keyboard on the laptop locks on the q button, if I press another button like an arrow key it stops. I hardly use the the built in keyboard as I use it with an external wireless keyboard most of the time, its had no spillages and everything was working fine the previous day. I've since installed a a Lenovo update (Lenovo System Interface Foundation - 1.0.69.2) and ran checks for other updates, but nothing related to the keyboard. I also ran the dump files through WinDbg which identified i8042prt.sys as the likely suspect. Although this is the first time I used WInDbg so don't take my word for it. Any ideas on updating i8042prt.sys would be much welcome (if it is the cause). Have look on the lenovo site but nothing there. My dump files are here https://www.dropbox.com/s/dvym905rn2d9k93/dump%20files.rar?dl=0 I may now try a restart and see how it goes, but I need the machine to run my own business and as such its pretty critical for me to fix this. Thanks again.

Answered
Other Windows apps 19/01/2017 0 Comments 1 views

Corruption Of Windows 10

Windows RT

Hi, Recently One of My Windows File Corrupted and I was Not able to run Many Programs, I asked many people on Microsoft.com But nobody had a Fix But luckily I Had The dell backup and Recovery That could Recover My Pc to The state when it was bought....... Now I was able to Run everything But The Only This was that I was On Windows 8.1...... I Had Upgraded to Windows 10 But now it was Lost.... So Is there any way i could get windows 10 back??? Please Help... Thank You.......................

Answered
Security, privacy & accounts 19/01/2017 0 Comments 5 views

a virtual space is pressed when the keyboard lid is connected after the latest win 10 upgrade

Windows RT

The problem is, when the keyboard lid is connected, a virual space will be pressed and disturbs my use(search, change the input language, and input characteristics ). For example, when I want to use "Windows" key to call the start menu, the keyboard switch will be activated since the hot key for this is “Win+Space” and the computer simply changes my input language. Or, if I go to the start menu, the Cortana will be activated before I do anything else since the virtual space keeps typing and leaving a lot of white space in Cortana. The product I use is Surface Pro 3, and the keyboard lid I use is the one for pro 4. The problem strats to occours after last win 10 upgrade (10,Jan).

Answered
Search, touch and mouse 19/01/2017 0 Comments 56 views

SQL Server 2016 Report Builder failed to install

Windows RT

I'm evaluating the SQL Server Reporting Services 2016. When I install SQL Server 2016 Report Builder on my Windows 7 machine, the installer keeps asking it requires .Net Framework 4.5. My machine had .Net Framework 4.6.2 installed. I removed .Net 4.6.2 and 4.5.2 and installed .Net 4.5, however the installer still keeps asking me to install .Net Framework 4.5. My Windows version is Win 7 Enterprise with SP1. Has this issue been reported? Is there any plan to release a patch? Is there any workaround? Thanks, Jaehong

Answered
Windows Store 19/01/2017 0 Comments 2 views